Prefab house

lightweightcontemporarysteel

LIGHT STEEL HOUSE TECHNICAL SPECIFICATIONS AND DATA WALL FRAME: Walls are produced with 140 mm thick sections suitable for the project and static calculations, using uprights and registers. Wall thickness can be increased upon request. JOINTS: All steel parts are produced without welding, using screws and bolts with an allen method. It involves a system using cold-formed galvanized steel sheet profiles (U, C, L, Omega, etc.) as carriers. INSULATION: 100 mm thick rock wool is applied. EXTERIOR WALL CLADDING AND PAINT: Cement bonded particle board is applied over the steel frame. It's jointed and painted with exterior wall paint. INTERIOR WALL CLADDING AND PAINT: An aesthetic appearance is achieved by applying mesh and plaster between gypsum boards with a special wall system. For wall cladding, 12.5 mm thick gypsum board is used. In wet areas, 12.5 mm thick green gypsum board is used. It's finished with plastic paint after plastering. The interior panel thickness is 110 mm. ROOF ROOF SYSTEM: Concealed roof with parapet. The roof slope can be increased upon request in areas with heavy snow load. TRUSS CONSTRUCTION: Roof trusses, beams, and columns are made of specially bent stainless galvanized sheet. The roof system is designed according to project and static calculations, with trusses placed on top and cold-formed galvanized sheet purlins mounted on them. The system is produced in our modern manufacturing facilities without welding and with bolt connections. The truss end area is covered with exterior wall cladding. The building is surrounded by at least 20 cm wide stainless galvanized sheet eaves with vents.