Regardless of any final shower area designs, walls are often fully cladded with plasterboard or built with plastered masonry. In wet areas, particularly the bathtub and shower areas, these walls should be sealed and protected. The wedi Tools wall sealing set is the perfect solution. It contains all the required components for reliable and long lasting sealing of wall surfaces in the shower area: wedi Subliner Dry (prefabricated waterproof membrane with a solid material thickness of just 0.51 mm), wedi 520, wedi Tools sealing tapes and wedi Tools sealing gaiters.
» wedi Subliner Dry - thin-layered sealing membrane
» wedi Tools sealing tape - for reliable sealing of intersections and butt joints
» wedi 520 - flexible waterproof sealant for the sealing of wedi Tools sealing tapes
» wedi Tools sealing gaiter - flexible sealing for pipes
- 3 × wedi Subliner Dry sealing membrane, 250 × 100 cm
- 3 × wedi Tools sealing tape, 250 × 12 cm
- 1 × wedi Tools sealing gaiter DN 90 – 125
- 2 × wedi Tools sealing gaiter 1/2 – 3/4 inch
- 1 × wedi 520 flexible sealant, 3,6 kg
Areas of use wedi Tools wall sealing set
For secure sealing of corner, connecting and butt joints and intersections.
When sealing joints and intersections, wedi Tools sealing tapes must be cemented into the fresh sealant / epoxy resin adhesive and pressed in with a smoothing trowel, depending on the load. When using epoxy resin adhesive, the surface must be cemented over and sprinkled with quartz sand.
The wedi Tools sealing tapes must overlap by at least 5 cm.