Fast, pourable and strong repairs for heavy wear areas
Easy to use rapid dry formula
Takes forklifts in just 2 hours
Just add water, mix and pour
Fibre reinforced for added strength
Flowpatch® is an easy to mix pourable material, ideal for quick repairs to level concrete, inside or outside. Its very strong formula will harden quickly and will accept heavy traffic including forklifts only 2 hours after application.
We recommend Watco Flowpatch Deep Fill® for repairing or levelling deeper holes between 10-200mm in concrete flooring.
Recommended areas of use
- Ideal for filling deep holes before screeding with Watco Flowtop®
- For repairs to ramps, steps and for reforming edges, we recommend Watco Concrex®
- For resurfacing or levelling larger areas of rough or tamped concrete, please use Watco Flowtop®
Features
- Just add water, mix and pour
- Can be applied to damp (not wet) concrete
- Sets at low temperatures (down to 5°C)
- Flowpatch® can be applied from feather edge to 100mm
- Light grey, slip resistant finish
- Odourless, non-toxic, non-hazardous formula
- Fibre reinforced
Properties - Quick setting, pourable patch repair for heavily trafficked floors, just add water, mix and pour, slip resistant finish, sets at low temperatures.
Suitable for - Concrete
Interior or Exterior - Interior and exterior
Primer required - No primer required.
Composition - Reinforced cement & polymer powder
Coverage - Approximately 0.5m² at 25mm thick per 25kg
Curing time - 1 hour at 15°C
Minimum application temperature - 5°C