Liquid epoxy resin floor covering Watco Safety Grip

smoothconcrete looknon-slip

A tough, high build epoxy coating ideal for steps and ramps Heavy duty with excellent chemical resistance Slip resistant even when wet or oily Easy one coat application for concrete, metal or wood Our best selling coating for over 40 years Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/ disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Suitable for - Concrete well bonded paint, flat metal Finish - Glossy, coarse texture Interior or Exterior - Interior and exterior Primer required - Not usually. See ‘Priming’ section in 'Application'. Composition - 2 part, 100% solids epoxy resin Number of components - 1 x curing agent, 1 x resin and 1 x anti slip particles. Coverage - 5m² per unit Number of coats - 1 Mix ratio - Safety Grip/Cold Cure: Up to 30 minutes at 20°C. Rapid: Up to 20 minutes at 20°C. Flex: Up to 25 minutes at 25°C. Dry film thickness - Approximately 320 microns Curing time - 16 hours at 20°C Minimum application temperature - 15°C Shelf life - 12 months in unopened containers.