Vinyl flooring EVOLUTION VELOX

indoorfor living roomsfor office

Best for laying on raised floors. 
The use of the special adhesive with a peel-and-stick effect allows a very quick and effortless installation. It consists of 8 layers hot-coupled by pressing. Pile up the boxes of Evolution Velox in stacks up to a maximum of 7 boxes, in the same room where the installation will take place.  Acclimatize the material at least 24 hours prior to starting the installation at a minimum temperature of 18°C. T he temperature must be kept all along the installation. The substrate minimum temperature must be around 13°C with and the relative humidity inside the room should be between 35% and 65%. The substrate must be flat, smooth, dry, solid, free of cracks, stable and moisture-proof. Choose the leveling grout to be used following the manufacturer's instructions according to the type of foot traffic the installed floor will be subject to. The correct functioning of the heating system must be checked prior to starting the installation work. Make sure that the underfloor heating is switched off at least 48 hours prior to the installation and that it stays switched off for at least 48 hours after installation is complete. When the heating system is switched on again, gradually increase the temperature over several days, increasing by a few degrees each day, until the desired temperature is reached. The temperature must never exceed 27°C on the backing of the floor in contact with the substrate.  Prior to starting the installation, determine the type to be followed taking into account the shape of the room and the light angle of incidence.