The user-friendly TwinFresh Style mini ventilator will provide the room with clean and fresh air. Significant reduction in ventilation heat loss due to heat recovery. Humidity balance and regulated air exchange create individually controlled microclimate.
Many units can be connected to one control network.
High heat recovery efficiency of up to 81 % is achieved due to the use of a cellular regenerator.
The design of the unit provides easy maintenance and installation.
- -
- -
High-quality soundproofing material is used keeping the noise of the unit at the level of human whisper.
The unit modes are controlled via the sensor control panel located on the casing of the unit or via the remote control.
The capacity of one ventilator is enough to provide a room with the area of up to 15 m2 with fresh air.
The unit modes are controlled via the sensor control panel located on the casing of the unit, via the remote control or via the smartphone.
• Speed setup
• Operation mode setup
- Ventilation
- Regeneration
• Timer setup
- 4 hours at speed III
- 8 hours at speed I
Operation modes:
• ventilation with energy recovery
• ventilation
• speed switching and ventilator turning off
It is possible to control all the ventilators simultaneously by connecting them to a single network.
In this case, all ventilators (Secondaries) will respond to a signal from the Primary ventilator only.
Trendy ventilator design.
High efficiency – 81 %.
Can be mounted inside a prepared hole (from ∅ 110 mm) in a wall.
Humidity control with a humidity sensor.
Connection of the units into one control network. -
Connection of an external CO2 sensor or other external relay sensors.