Polyethylene raised floor pedestal HA 95/155

high-resistancefrost-resistantacoustic

This riser pedestal is adjustable for heights of between 95 to 155 mm, and designed for paved terraces intended for pedestrian use. Self-levelling riser pedestals can be used on uneven or irregular ground to compensate for - or create - a gradient of up to 5%, regardless of ground characteristics. Located beneath tile corners at each intersection, it allows air to circulate freely, prevents rising damp and leaves space for cable and pipe runs. UV and frost resistant. The manual screw adjuster enables precise height adjustment. Quick and easy to install Precise height adjustment using the rotating nut: no additional tools required. 3 mm divisible spacers (quantity 4) to make the installation easier. Conforms to French regulation DTU 43.1. Resistance : UV and gel Strong resistance to crushing (higher than 1T) Can be used with 10mm and 60mm extensionx. Self-levelling riser pedestals should be used only on uneven ground or existing concrete support. Terrace finishing can be done with lateral riser support and side finishing plate. Please read our instructions. Please use at least 1 riser pedestal/corner. Always follow paving manufacturer recommendations to ensure the suitability of paving products for use with riser pedestals and the number of risers per m2 to use. The paving used must be self-supporting class T7, T11 or F +. Terraces, decking and patios for outdoor pedestrian use only.