Polyethylene raised floor pedestal HD 40/60

high-resistancefrost-resistantfor patio

This riser pedestal is adjustable for heights of between 40 and 60 mm, and designed for tiled, ceramic or slab terraces intended for pedestrian use. Located beneath tile corners at each intersection, it allows air to circulate freely, prevents rising damp and leaves space for cable and pipe runs. By removing the need for arduous earthmoving and joints, it makes the whole process of terrace and patio construction easier. The manual screw adjuster enables precise height adjustment. Quick and easy to install Precise height adjustment using the rotating nut: no additional tools required. 3 mm divisible spacers (quantity 4) to make the installation easier. Conforms to French regulation DTU 43.1. Resistance : UV and gel Strong resistance to crushing (higher than 1T) Paving riser pedestals should be used only on stabilised level ground or on existing concrete support. Cannot be used with 60mm extension. Terrace finishing can be done with lateral riser support and side finishing plate. Please read our instructions. Please use at least 1 riser pedestal/corner. Always follow paving manufacturer recommendations to ensure the suitability of paving products for use with riser pedestals and the number of risers per m2 to use. The paving used must be self-supporting class T7, T11 or F +. Terraces, decking and patios for outdoor pedestrian use only.