Blockfix™ is a specially developed thin joint and repair mortar used with ALC blocks. These thin-application products are produced to provide reliable adhesion while helping to minimise thermal bridging and other problems commonly associated with traditional mortars.
It is available in two colours, grey and white. A cementitious specially formulated thin joint and repair mortar used with ALC blocks. This ensures that the joint width is kept to a minimum hence eliminating the cause of thermal bridging associated with traditional mortars.
Properties
Extended open time.
Minimum joint width, reducing plastering costs and thermal bridging.
Formulated specifically for ALC block laying.
Excellent adhesion.
Areas Of Use
Blockfix™ is a specially developed thin joint and repair mortar used with ALC blocks.
Application Method
Preparation of surfaces
Ensure the ALC surface is free from loose particles, dust, dirt, grease and oil. Surface should be moistened with water immediately prior to application of BlockfixTM ALC.
Mixing
Mix thoroughly with the recommended amount of water, with a high speed mixer or with a hand agitator for 3 – 5 minutes. Let the material stand for 5 minutes prior to application.