Standing slide and turn system
Non-thermally insulated aluminum profiles with tempered safety glass
The flush bottom track is particularly suitable for use in „Barrier-free dwellings“ according to DIN 18 025
Panels can be stacked open either internally or externally
Opening of panels by sliding to one side or to both sides
Height variations can be compensated by a height compensation profile
All fittings are concealed within the profiles
Low-maintenance, non-corroding and failsafe fittings
Inside and/or outside locking and unlocking possible
Locking and unlocking via turning knob
Optionally with lever lock (“child-proof”)
The running assemblies consist of four vertically arranged rollers
Low-noise, low-wear, heat and cold resistant running surfaces
Running assemblies pivot at any angle between 90° and 180°
Tongue and groove joint between the end caps
Brush seals are used horizontally at the top and bottom, at the inside and outside
Lower and upper brush gaskets are attached to the panel frames and not to the guide track
10, and 12 mm tempered safety glass panes (ESG-H)
Panes width of up to 15 mm is possible
Panes secured via concealed screw-fixing system in top and bottom panel profiles
Subsequent replacement of panes without difficulty
Subsequent replacement of panels without difficulty
Unpressurised drainage via inclined floor construction
Integrated water drainage channel on inside of bottom track
End-caps for lateral sealing of bottom track
You can choose from a large number of colours on the SUNFLEX colour wheel.
Resistance to wind load class A4 according to EN 12210 (Typ I)