Sliding system
Bottom loaded/running construction
Option of flush or weathered bottom track
The flush bottom track is particularly suitable for use in "barrier-free dwellings"
according to DIN 18 025
Optionally with or without lateral vertical frame profiles
Optionally with or without vertical panel frames
Height variations of up to 20 mm can be compensated
Airborne sound insulation to Rw = 17 dB according to DIN EN ISO 10140-2
Measurement of deflection class 4 according to DIN EN 12211/12210 (10 mm glass)
Repeated pressure/wind suction class 4 according to DIN EN 12211/12210 (10 mm glass)
Safety test class 4 according to DIN EN 12211/12210 (10 mm glass)
All fittings are concealed within the profiles.
Low-maintenance, non-corroding and failsafe fittings
Integrated followers automatically move the adjacent panels when closing the sliding panel
Various handles and C-pull handles available for inside and outside
Inside and/or outside locking possible
Optionally with inside or outside lever lock
Low-noise, ball bearing rollers with wear-resistant and low-maintenance running surfaces
The carriages feature a height adjustment of up to 5 mm
The load capacity of the carriages is 80 kg/panel (maximum panel weight)
Sliding panels overlap vertically by approximately 24 mm
Gap of approximately 8 mm between glass panels (when 10 mm glazing is used)
Gap sealing via aluminium profile with brush gaskets
Brush gaskets are fitted horizontally at the top and at the vertical frame on the inside and outside
8 or 10 mm tempered safety glass panes(ESG-H)
Inclined floor construction and length-optimized webs
End caps for lateral sealing of the bottom tracks