The luminaire is designed to operate with a 100V to 240V supply, 50-60Hz, according to the lamp used.
Before and during the installation, make sure you follow the guidelines below:
• Always check the earth wiring for the line being used.
• Verify that the lamp voltage is correct for the main voltage
• Do not use lamps other than indicated on the lamp table
• There are no fuses inside the units, if it is necessary they should be installed in the mains
• The luminaires can be connected to a dimmer
High heat dissipation aluminum and steel metal body with natural ventilation system
Colour filter frame holder
Clutch locking system fork
Easy access to the light source for quick maintenance
Polished 99,99% aluminum mirror
PO version on request with pole control 2 ways for pan and tilt movement
• The luminaires are intended for professional use only so they have to be installed and used by qualified technicians.
• The products are intended for indoor use: consequently they have to be protected from humidity and rain, if used in different conditions (IP 20)
• Do not mount the luminaire on or near a flammable surface
• Please note carefully the notes written on the labels of the luminaires.
• Do not forget to connect a safety rope, if required by local country safety regulations
• For safety requirements the net shall be mounted on the front of the lamp to prevent any large glass fragments from falling in case of breaking.
• The projector can be either suspended or placed on a plane surface.