Alsan® 970 F is available in the following standard colours:
Shade 7030: Stone grey
Shade 7032: Pebble grey
Shade 7043: Traffic grey
Shade 1001: Beige
Alsan® 970 F can be applied at substrate and ambient temperatures between + 3 ° min. and + 35 ° max.
IMPLEMENTATION
Mixing First stir the tub contents thoroughly.
Then add the catalyst while stirring the resin at the slow-speed setting and mix for 2 minutes. Make sure that the product on the base and sides of the container is mixed in.
At product temperatures < 10 °C the product should be stirred for 5 minutes, as the catalyst will take longer to dissolve.
Use Alsan 770 for waterproofing horizontal areas. Alsan 770 TX is used for vertical surfaces (e.g. upstands on details).
Apply a generous and even layer of the mixed material to the entire area (at least 1,5 kg/m2), then immediately embed the Alsan Fleece P and use a sheepskin roller to remove any air bubbles.
Cover the fleece straightaway (wet in wet) with a second layer of material (at least 1 - 1,5 kg/m2, as required).
In each case use a sheepskin roller to spread the material over the surface.
Fleece overlaps must be at least 5 cm wide.