Rubbol Satura Plus is a high build, satin, solvent-borne opaque coating for exterior and interior timber joinery and trim, suitably primed metals and hard plastics.
Conditions: Do not apply if there is a risk of rain, or when air/substrate temperatures are below 5ºC or above 30ºC duringapplication or drying periods. Protect from frost and rain until dry.
Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish.Initial procedure : Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced.
We do not recommend thinning.Applying the product For best results use a good quality, long-haired, soft bristle brush.Two coats of Rubbol Satura plus should be applied, allowing a minimum of 18 hours drying time between coats. On new work,