Styrene-free anchoring adhesive for medium to high loads
Solvent and styrene-free, epoxy acrylate based, 2-component anchoring adhesive for normal / moderate climate conditions.
Usage
As a fast curing anchoring adhesive for all grades of:
■ Rebars / reinforcing steel
■ Threaded rods
■ Bolts and special fastening systems
■ Concrete (cracked and non-cracked)
■ Solid masonry
■ Steel
■ Hard natural stone*
■ Solid rock*
* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-2+ Adhesive must be tested by first applying the product to a sample area. In particular, check bond strength, surface staining and discoloration.
Packaging
300 ml standard cartridge
12 cartridges per box
1 pallet: 75 boxes
Advantages
■ Fast curing.
■ Standard guns can be used for application.
■ High load capacity.
■ ETA to ETAG 001 for anchoring in concrete.
■ ETA to ETAG 001 for rebar connections.
■ Suitable for cracked concrete.
■ Drinking Water certified.
■ LEED Attestation available.
■ Non-sag, even overhead.
■ Styrene-free.
■ Low odour.
■ Low wastage.
■ Suitable in wet / damp (but clean) holes.
■ Appropriate for marine enviroments.
Colour
Component A: white
Component B: black
Component A+B mixed: grey