Vapour control layer
Sarnavap®-2000 E is an unsupported vapour control layer based on PE-LD/PE-HD (Low Density Polyethylen/High Density Polyethylen).
Usage
■ Vapour control layer (VCL) is applied over most common substrates. Substrates should be smooth, dry and strong enough to support foot traffic.
■ Sarnavap®-2000 E vapour control layer is used for flat and nominal pitch roofs.
■ Sarnavap®-2000 E vapour control layer is not suitable for temporary waterproofing.
Packaging
Packing unit: - see price list
Roll length: - 25.00 m
Roll width: - 4.00 m
Roll weight: - 22.00 kg
Advantages
■ Ease and speed of installation.
■ Stays flexible at low temperatures.
■ Long life-span.
■ Non-decaying.
■ Constant vapour diffusion resistance.
■ High water vapour resistance makes it suitable in combination with all membranes.
■ Wide application range, in regard to use in different system applications and/or in combination with different structural deck types, substrates.
■ Recyclable
Colour
Surface: - smooth, PE-LD foil with Sarnavap® printed on it.
Colour: - green
Sustainability / Certifications / Approvals
APPROVALS / STANDARDS
■ CE marking according EN 13984.
■ Reaction to fire according to EN 13 501-1.
■ Quality management system EN ISO 9001/14001.
Product Information
Chemical Base
Low Density Polyethylene (PE-LD) foil / High Density Polyethylene (PE-HD) foil.
Shelf Life
The product does not expire during correct storage.
Storage Conditions
Store rolls in horizontal position on a smooth surface and protected from direct sunlight, rain and snow. Do not stack pallets of rolls during transport or storage.