Stone protective treatment STONE AND TERRACOTTA OIL EXTERIOR

FOR EXTERIOR STONE AND TERRACOTTA SURFACES Unique oil combination Protection against dirt and abrasion Highly water repellent Microporous, breathable finish which does not crack, peel, flake or blister FINISHES Clear Satin APPLICATION TOOL Osmo Flat Brush, Floor Brush, Hand Pad or Microfibre Roller RECOMMENDED USE Exterior stone, terracotta, patio and paving surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 750ml, 2.5L DRYING TIME 8-10 hours CLEAN UP Osmo Brush Cleaner COVERAGE 32m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION The surface must be asorbent, clean, dry and frostfree. Osmo Stone and Terracotta Oil is ready to use; do not thin. Stir well. NOTE Oils enhance the natural colour of the substrate (permanent wet effect). Trial application is absolutely essential! Impregnation may influence the slip resistance of the original surfaces. White or very light-coloured stone/surface may yellow slightly as result of the oil treatment!The acid sensitivity of the stone (e.g. marble) remains unaffected. Non-absorbent surfaces, such as glass, glazed tiles or ceramic, cannot be treated (impregnated). Substrates sensitive to solvents (e.g. plastics such as Plexiglas) must be protected. A lack of ventilation leads delays in drying.