Protective wood stain NATURAL OIL EFFECT

ATTRACTIVE SILVER MODERN EFFECT Extremely weather and UV resistant Very water and dirt resistant Resistant to mould, algae, mildew and fungi Reduces wood swelling and shrinkage Natural wood grain remains visible Microporous, breathable finish which does not crack, peel or flake No sanding necessary for future applications FINISHES Agate Silver, Graphite Silver, Onyx Silver (Satin) APPLICATION TOOL Osmo Flat Brush or Microfibre Roller RECOMMENDED USE Exterior wood surfaces RECOAT One coat, when signs of wear become visible SIZES 5ml, 125ml, 750ml, 2.5L DRYING TIME First coat: 4-6 hrs, Second coat: 12 hrs CLEAN UP Osmo Brush Cleaner COVERAGE 26m²/L with one coat COATS 2 coats CARE Osmo Spray Cleaner (Exterior) SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain Effect is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. If possible, please apply the first coat to all sides before installation. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.