The bollards will be automatic retractable rising bollards with integrated hydraulic motorization ALE A25-60-C50, from AMCO's facilities, compliant with the NFP 98-310 standard and the decree of 18.09.2012 relating to accessibility to public spaces - RAL at the choice of the owner.
With a minimum resistance of 100,000 Joules without deformation, this resistance will have to be demonstrated by a crash test carried out with a car of 1T minimum launched at 50 KPH.
Each bollard is made up of:
A Steel Cylinder - 25 cm diameter Height 60 cm thick 16 mm
A 20mm-thick stainless steel-finished disc built into the top of the cylinder
A pair of Teflon sliders, made in hdpe 1000 secured to the bollards;
A brush sealing to avoid scratches on the cylinder
A 20mm thick stainless steel lid;
A 6mm-thick high-resistance stainless steel frame,
A 3 mm-thick galvanized steel formwork casing ;
Fall of the bollards by gravity without manual or electrical assistance in the event of a power failure.
The casing will be connected to the sewerage if the network is nearby by a 45 mm TPC duct. Otherwise, the bollards will be placed on a 30cm-thick rock bed.
Main features
CRASH TEST :
Crash test-certified resistance: can stop vehicles weighing 1.1 ton and launched at 50km/h, without damage and functional bollard after the collision
• Speed : 50 km/h
• Weigth : 1 T 100
• Kinetic energy : 106100 Joules
• Penetration : 0
Steel retractable bollard, Ø25 cm, 60 cm high
Intensive operating, up to 3,000 move/day
Resistant to cycle breakage
Hydraulic motor integrated or to be mounted