Pigmented, 2-component epoxy coating for concrete surface protection. Designed for general purpose uses in multilayer systems, from the primer coat to the topcoat layer.
Multilayer protective coating for heavily used concrete floors, in all kinds of
indoor areas.
• Industrial flooring
• Poorly ventilated areas.
• Parking decks.
• Warehouses.
• Shops.
This material can be used as a primer and as a component of all the steps in a
multilayer system. Also suitable as a self-leveling flooring resin. The different
available option depends on the application choices, fillers and the pigmentation
options.
In order to achieve a good degree of penetration and bonding, support must be:
1. Flat and leveled (Product is self-leveling)
2. Compact and cohesive (pull off test must show a minimum resistance of 1,4N/mm2).
3. Even and regular surface
4. Free from cracks and fissures. If any, they must be previously repaired.
5. Clean and dry, free of dust, loose particles, oils, organic residues orlaitance.
Concrete surfaces must be previously prepared by sandblasting or any other suitable means. Remove all dust and loose material before priming. The recommended temperature of the support is 15-25ºC, but not less than 10ºC. The temperature of the support must exceed the ‘’dew point’’ by 3ºC during application and drying.
The recommended temperature of the support is 15-25ºC, but not less than 10ºC. The temperature of the support must exceed the ‘’dew point’’ by 3ºC during application and drying.