Colodur Eco is a waterborne high performance aliphatic polyurethane resin. It
cures giving hard and flexible floor coatings, abrasion resistant. It provides a
surface protection for heavily used floorings. This material does not discolour
upon sunlight exposure, making it suitable for outdoor applications. Being
almost solventless, it can be used in public areas with no need to close them.
Colourless and pigmented versions are available.
Suggested uses include:
• Parking decks
• Walls
• Industrial flooring.
• Tennis courts and recreational areas.
• General concrete flooring
• Sealing and surface protection of epoxy, polyurethane or cementitious
self-leveling products.
• Walls
EN 13813 SR-B4,0-AR0,5-IR14,7, Applus Laboratory: Taber Abrasion test. N. 08/32309984.
Slip class: No. 10/1709-1861- 10101589-1262
Support must fulfill the following requirements:
• Cohesive strength: minimum 1,5 MPa.
• Compression strength: minimum 25 MPa.
Free from any vapour or water pressure. Support must also be clean, dry and
free from poorly adhesive areas. Moisture content must be less than 4%.
Recommended support temperature: 10ºC to 25ºC.
If underlying moisture is suspected, use a suitable primer. Please contact
Krypton Chemical for further information about primer types.
New concrete slabs must be allowed to dry for three weeks before starting job.
On porous substrates, it is recommended a prior sealing/primer coating. Direct
application of Colodur ECO Matte on a porous substrate is not recommended
because of the risk of excessive matting agent deposits on the surface.