Floor heating for renovation. Super slim and lightweight and quick - these are the special strengths of the x-net C15 thin layer system. Compared to the conventional systems, the knob element in the x-net C15 thin layer system is constructed such that the casting compound permanently bonds with the substrate and thus enables an extremely low floor structure. This makes the system ideal for efficient renovation solutions, with the option for heating and cooling. Laid directly on a variety of existing floor coverings, without costly chiselling or demolition.
Heating and cooling
Low drying times
Quick reaction time
Optimal for renovations
Low static weight
Standardised installation spacing due to the system
Extremely low flow temperature through low pipe covering
Can be laid without chiselling or demolishing works
Application after appropriate pre-treatment on almost all subsurface
Low element height of 14 mm, complete floor mounting 17 - 22 mm (without floor covering)
Two pipe dimensions - one knob element:
1. x-net 5-layer pipe 10 x 1.3
2. x-net 5-layer pipe 12 x 1.4
Diagonal installation of the pipe without additional pipe fasteners
High impact resistance
High pipe retention force
Quick installation
Heating technology tested according to DIN EN 1264 and DIN Certco-certified
In one and the same knob element, the pipe dimensions 10 x 1.3 mm as well as 12 x 1.4 mm can be laid. In contrast to the pipe dimensions 10 x 1.3 mm, the x-net 5-layer pipe 12 x 1.4 mm has about 35 % more cross section of flow and thus enables:
Greater pipe lengths in the heating circuit
less heating circuits for the same area, thus more compact manifolds and distribution cabinets