The Kent Pyramid Road Demarcation Studs are 3.93″ (100mm) x 3.93″ (100mm) with 0.70″ (18mm) height from ground finish to top point of stud.
These Studs are designed to be large enough for drivers of cars to notice them visibly and also be noticeable if driven over. They are made from 0.11″ (3mm) thick grade 316 stainless steel and have a Electro polished finish.
Pyramid Stud 100x100x18mm
Grade 316 Stainless Steel
Electro Polished Finish
3.93″ (100mm) long root fixing
Stainless Steel Maintenance
Clean the stainless steel components using warm water with a mild detergent with a non
abrasive cloth or sponge. Heavier stains may require the use of a nylon scouring pad or a stainless steel cleaner.
To remove paint or graffiti (or light concrete splashes) use a cloth and alkaline or solvent paint strippers according to type of paint. For Satin Finish Stainless try to follow the
direction of the grain when cleaning vigorously or polishing. For Bead Blasted Finish use a circular motion. Rust spots or 'tea stains' can occur on the surface of the material, these are normally caused by contamination from ordinary mild steel, particularly in areas where construction work has been undertaken. Where contamination of the stainless has occurred from ordinary mild steel coming into contact with the stainless, use Rust Remover
410. In cases where the surface is severely stained as a result of severe environmental conditions or scratched due to misuse, it may still be possible to restore the original finish using chemicals such as Oxalic Acid solution.
There are many stainless steel polishes available to enhance the surface finish.