The Kent Criss-Cross Demarcation Stud KCCDS25 is an anti-slip variation of the Kent Demarcation Stud. It is used to delineate walkways and site boundaries. The disc lies 0.19″ (5mm) above the surface once installed. It is manufactured using Grade 316L Stainless Steel, this material is perfect for high-traffic pedestrian areas. It has an overall diameter of 0.98″ (25mm).
Grade 316L Stainless Steel
Bright Satin finish
5mm Above Ground
Easy installation
Specify:
Kent Criss Cross Demarcation Stud (KCCDS 25); Grade 316
Stainless Steel; Dia: 0.98” (25mm), Height: 0.19” (5mm);
1nr 0.39” (10mm) dia x 0.70” (18mm) high studs, Polished
Finish;
Clean the stainless steel components using warm water with a mild detergent with a nonabrasive cloth or sponge. Heavier stains may require the use of a nylon-scouring pad or a stainless steel cleaner.
To remove paint or graffiti use a cloth and Alkaline or solvent paint strippers according to type of paint. In the case of a bead blasted finish, where abrasive cleaning is required, always use a random circular rubbing action with a cloth.
In the case of brushed finishes the surface consists of uniform fine ‘scratches’ running in one direction so where abrasive cleaning is required always use a straight back and forward rubbing action in the direction of the grain using soap and warm water.
Rust spots or ‘tea stains’ can occur on the surface of the material, these are normally caused by contamination from ordinary mild steel, particularly in areas where construction work has been undertaken. Such stains can be removed using Rust Remover 410.