Kent Stainless Sphere Anti Skateboard studs are used to deter unwanted skateboarding in order to prevent damage to street furniture and stonework elements. The studs eliminate the long continuous edge of many street furniture and stone products.
Electropolished finish
Grade 316L stainless steel
Easy installation
Used to delineate walkways and site boundaries
Specify:
Kent Sphere Anti Skate Stud (KSASS 35); Grade 316 Stainless Steel; Dia: 1.37” (35mm), Internal Radius of 0.39” (10mm); 1nr 0.23” (6mm) dia x 1.57” (40mm) high
studs, Polished Finish ;
The Stainless Steel material is ideal for high traffic pedestrian areas and it does not adversely effect the aesthetics of the elements they are protecting
Clean the stainless steel components using warm water with a mild detergent with a nonabrasive cloth or sponge. Heavier stains may require the use of a nylon-scouring pad or a stainless steel cleaner.
To remove paint or graffiti use a cloth and Alkaline or solvent paint strippers according to type of paint. In the case of a bead blasted finish, where abrasive cleaning is required, always use a random circular rubbing action with a cloth.
In the case of brushed finishes the surface consists of uniform fine ‘scratches’ running in one direction so where abrasive cleaning is required always use a straight back and forward rubbing action in the direction of the grain using soap and warm water.
Rust spots or ‘tea stains’ can occur on the surface of the material, these are normally caused by contamination from ordinary mild steel, particularly in areas where construction work has been undertaken. Such stains can be removed using Rust Remover 410.