Kent Fin Studs are used to deter unwanted skateboarding in order to prevent damage to street furniture and stonework elements. The Fins eliminate the long, smooth edges, so skateboarders can no longer ‘grind’ their boards along the edges.
The Stainless Steel material is ideal for high traffic pedestrian areas and it does not adversely effect the aesthetics of the elements they are protecting.
Grade 316 Stainless steel
10mm Thick Steel
Polished edges
Satin Finish 320 Grit Polish
3 Installation pins
Specify:
Kent Anti Skate Fin Stud KFS 100/50/37, 3.93” (100mm) Width,
0.39” (10mm) thick, 1.96” (50mm) height ; 3 pins; Grade 316L Stainless Steel; Satin Finish 320 Grit Polished.
Maintenance of Stainless Steel
Clean the stainless steel components using warm water with a mild detergent with a non-abrasive cloth or sponge. Heavier stains may require the use of a nylon-scouring pad or a stainless steel cleaner.
To remove paint or graffiti use a cloth and Alkaline or solvent paint strippers according to
type of paint. In the case of a bead blasted finish, where abrasive cleaning is required, always use a random circular rubbing action with a cloth.
In the case of brushed finishes the surface consists of uniform fine ‘scratches’ running in one direction so where abrasive cleaning is required always use a straight back and forward rubbing action in the direction of the grain using soap and warm water.
Rust spots or ‘tea stains’ can occur on the surface of the material, these are normally caused by contamination from ordinary mild steel, particularly in areas where construction work has been undertaken. Such stains can be removed using Rust Remover 410.