Range of uses
Primer and top coat for building components of hard PVC for interior and exterior e.g. window
s, doors, shutters, gutters, balcony cladding etc. Foil-coated windows and doors may not be coated with PUR-Plast as the foliation mostly consists of polyethylene (PE). PE is non-stick plastic.
Product properties
Jansen PUR-Plast is a very good flowing scratch- and abrasion-resistant primer and top coat with excellent adhesive properties. The paint is free of yellowing and absolutely block stable.
Binder base
Polyurethane resin
Degree of gloss
Silk-gloss
Drying
(23°C 60 % rel. air humidity)
Dust-dry: ca. 1 - 2 hours. Re-coatable after 4 – 6 hours. Windows can be closed again after 6 hours. Through-dried and full load after ca. 3 days. The values can fluctuate considerably depending on temperature and air humidity. Temperatures below + 10°C and too high air humidity can lead to trouble in film formation.
Spreading rate
10 - 12 m²/l
Type of application
Brush: Use brush with synthetic bristles. Roller: Use short-pile mohair roller. Spray: Dilute with max. 5% water.
Shade
RAL 9016 traffic white
Field of application
exterior , interior
Package size
750 ml, 2,5 l