High performance bitumen adhesive, reinforced with synthetic fibers.
Thanks to its composition, the product evens out substrate irregularities.
Bonding IKO roofing bitumen roof felts with a bottom finish of talc, sand or perforated polyethylene thermofusible film on an existing roof felt, concrete, insulation or metal.
3 years in the hermetically sealed packaging, when stored in a dry and cool place.
Partly used containers may be resealed and used again after correct storage.
To avoid the risk of spillage, always store and transport in a secure upright position.
The use of IKO pro HP Cold Adhesive is limited to a slope of ≤ 15%.
The substrate needs to be sound, clean and free from grease and nonadhering particles.
Prime porous substrates and bitumen roof felts with IKO pro Bitumen Primer- Fast Dry Primer - ECO Primer.
Apply IKO pro HP Cold Adhesive with a squeegee or scraper and roll the roof felt forward into the cold adhesive, smooth into position to achieve a full and even bond.
Weld the longitudinal and transverse joints with a hot air gun or gas torch.