Bitumen glue Activator Canister

exterior

Ready-to-use adhesive, that is used as a primer in order to improve the adhesion of self-adhesive roof membranes. IKO pro Activator Canister can also be used as a contact adhesive for bitumen roof felt with a lower surface protected by a macro-perforated thermofusible film. Improves the adhesion to the substrate of both self-adhesive roof membranes and of bitumen roof felt with a lower surface protected by a macro-perforated thermofusible film. IKO pro Activator Canister is used as primer for the application of IKO secura on IKO enertherm MG insulation. 18 months in the hermetically sealed packaging, when stored in a dry and cool place. If, after use, an IKO pro Activator Canister is not completely empty, the syringe hose and gun can remain connected to this canister without any problems for a period of 1 month without the adhesive curing in the hose /gun. For this purpose, the valve of the pressurised canister must be completely opened after use and the little black valve of the gun must be completely closed. If the waiting time to reuse an IKO pro Activator Canister is longer than 1 month or if the sprayhose is disconnected from the canister, then the sprayhose and gun must be flushed before reuse. To avoid the risk of spillage, always store and transport in a secure upright position. The air temperature and the product temperature should be between 5°C and 30°C. If necessary, the canister can be brought to the correct temperature by placing it in a bucket of cold or lukewarm water. The surface should be dry, stable, clean and free of any loose particle. Set the canister up as described in the Set-Up Guide.