Blind automation M/AG40B.1

for shutters

KNX Blinds Motor 220V AC controls the roller blind travel up/down, travel up/down to a specified percentage position by receiving a KNX signal. ■ Automatic travel measurement and supports limit point presetting ■ Enable to control the curtain travel up/down, stop and percentage up/down, and supports status response (travel up/down, stop, percentage up/down, etc.) ■ Enable short drag to start the motor ■ The rotate direction of the motor can be set to forward or reverse. ■ Preset position function, a total of 4 preset positions available ■ Safety control: Control the curtain position according to wind, rain, frost signal, and supports the power-on status recovery after power failure. ■ Auto control: Control the curtain position according to the weather status, heating, cooling signal ■ Scene control function ■ Forced position operation ■ Power-down save function ■ Overheat protection Basic Parameters Working voltage: 21-30V DC Working current: 6mA/30V DC Communication: KNX Rated input voltage: AC220-240V (50Hz) Rated input current: 0.9A Cable diameter of KNX terminal: 0.6-0.8mm Motor rotate torque: 3N.m Motor rotate speed: 22rpm External Environment Working temperature: -5℃~45℃ Working relative humidity: ≤90% Storage temperature: -20℃~60℃ Storage relative humidity: ≤93% Specifications Dimensions: φ35×528(mm) Net weight: 1224g (Motor) + 20g (Communication module） Housing material: Steel (Motor) + retardant-frame PC (Communication module） Installation: Wall hanging Insulation rating: E Work system: S2-3min Protection rating (Compliant with EN 60529): IP44