Washbasin mixer tap PIAVE

deck mountedthermostaticself-closing

Protection degree IPX4 Nominal voltage 110-240 V AC Mains frequency 50-60 Hz Operating voltage 4.5 V DC Power consumption 0.1 W Cable length 1 m Operating pressure 0.5-10 bar Recommended operating pressure with thermostatic mixer 0.5-5 bar Recommended operating pressure with thermostatic mixer 50-500 kPa Differentiated pressure CW/WW ≤ 1.5 bar Maximum test pressure, water 16 bar Maximum test pressure, air / inert gas 3 bar Ambient temperature 1–40 °C Storage temperature -20 – +70 °C Water temperature, adjustment range with thermostatic mixer 20-42 °C Maximum operating temperature, water 60 °C Maximum operating temperature, water, short-term 90 °C Flow rate at 3 bar 5 l/min Calculated flow rate 0.07 l/s Minimum flow pressure for calculated flow rate 0.5 bar Interval flush, adjustment range 1-168 h Interval flush, factory setting 24 h Interval flush time, adjustment range 5-200 s Interval flush time, factory setting 5 s Product material Brass chrome-plated / plastic For extracting tap water For public and semipublic areas For installation in washbasins or washtops For connecting cold and hot water (only for model with mixer or thermostatic mixer) For connecting cold or mixed water (only for model without mixer) For use with stainless steel bowls Model with mixer or thermostatic mixer not suitable for continuous flow heater, see technical data sheet “Washbasin taps with continuous flow heaters” Automatic flush actuation Infrared user detection Self-adjusting IR sensor Vandal-resistant Volume flow control via tap aerator Temperature presetting via mixer (only for models with mixer or thermostatic mixer)