Table extension 2046469

Oplà Folding+39 M120, hidden side table system with rapid extraction and elevation. The use of this system is oriented to living room or home-office, as the minimum installation depth is 390 mm. It can also be used in other areas of the home. We achieve the extension of the surface on which we are working and that it is located at the same level, adjusting its position to leave it completely flush with the main surface. The system can be installed in modules with a maximum width of 1,200 mm and a minimum depth of 390 mm, thus achieving an extraction surface of 370 mm and a load capacity of 40 kg. • System to pull-out and lift-up a work surface in environments such as a living room, home-office and office, 370 mm in length. • Valid for a maximum of 1,200 mm and a minimum of 450 mm width modules, with a minimum depth of 390 mm and with 40 kg load capacity. It has a stabiliser bar, which can be adjusted to the desired width by trimming. • The guides have a locking system when they are open to prevent unintentional closing. The system is hidden, both when in use and when not in use. • The screws for the installation and mounting instructions sheet are included. • The profiles that make up the guides are made of extruded aluminium and with a stainless anodized finish.