Glass touch controllers
2 buttons (SHARP edges)
The glass touch controller is a design RF (wireless) Control unit and is available in elegant black and white variants.
Only 8 mm thick.
RFGB-20: 2 capacitive buttons allows to control 2 devices.
When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down). Sending a command is indicated by a red LED.
Option of setting light scenes, where with a single press, you can control units of iNELS RF Control.
The rear base allows to be attached to installation using screws, double- sided tape or keeping controller on the table.
Battery power supply (2x 3 V/CR2032 - included in the supply) with battery life of around 2 years based on frequency of use.
Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO.
Number of channels: 2
Power supply: 2x 3 V batteries CR 2032
Design: glass - sharp
Colour: W - white
Dimensions: 94 x 94 x 8 mm
Protocol: RFIO2