4-fold KNX binary output for switching and control of loads. Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm). To be used in KNX installations for home and building automation.
ON/OFF switching of individual loads or groups of loads
Configurable as normally open or normally closed switch
Logical gates and forced mode for each channel
Manual control by levers (also without bus voltage)
Status feedback of output channels through the position of the levers
Block function for each channel
Time scheduling: switching delay for on and off, staircase lighting function with warning signal
Integration in scenarios
Operating hours counter configurable via bus
KNX binary output for independent switching of max. 4
groups of electrical loads. It has to be used in KNX installations for control of homes and buildings.
The ekinex® binary output EK-FA1-TP is a S-mode KNX
rail mounting modular device for independent switching
of 4 groups of electrical loads; to this purpose the outputs
of the device are equipped with potential-free relay contacts. The device is equipped with an integrated bus communication module and is designed for rail mounting in
distribution boards and cabinets. To operate the device
receives a telegram from the bus, sent by a KNX device
(such as a pushbutton, a sensor or another switching or
control device), that causes the opening or the closing of
one or more relays. The manual operation of an output
channel is possible also using the corresponding lever on
the front side. The position of the lever simultaneously
indicates the switching status of the relay.