Centrifugal fan HP 2000XT

floorcommercialindustrial

Speeds up the drying of joists, insulation etc. Used to distribute dry air to different rooms etc. HP2000XT is a robust radial fan for drying surface material, framed constructions and insulation. It has Ø 100 mm and Ø 50 mm outlets which make it possible to force air into the water damaged area effectively. Operating time meter and two speeds, 500 and 1500 m3/h. At 500 m3/h the noise level is very low. TECHNICAL DATA Air volume 500/1500 m3/h Available pressure 900 Pa Power supply 230 V / 50 Hz Power consumption 125/295 W Weight 13 kg Dimensions (L x W x H) 390 x 400 x 275 mm Intended use The HP 2000XT is developed and intended for water damage restoration, creating an air flow suitable for drying of insulation in framed floors or walls. The HP 2000XT has two speeds, corresponding to 1500 m3/h and 500 m3/h respectively. The inlet to the fan faces the floor and on its back it has one 100mm outlet and six 50 mm outlets to allow for the air to be distributed through hoses as required. The HP 2000XT is robust and has rubber feet to prevent scratching or discoloring the floors. It is equipped with an electromechanical hour counter alt. Time/Kwh meter. When the air must be filtered, the HP 2000XT can be used together with the Flexifilter HEPA H13. Features: • High Capacity • Two fan speeds • Robust • Hour counter alt. Time/Kwh meter • Low noise • Stackable Manufacturing Directive The HP 2000XT is CE approved. Waiver of Liability • Faulty, incorrect installations and/or incorrect use can cause damage to property and human injury.