The deadweight anchor VECTASAFE® insures the protection against falls from height for 1 person. It allows the protection of the users during maintenance and cleaning works. It is the best solution when it is technically not possible to be attached on the existing support. The system overcomes the problem of having to drill the roof membrane. It has been designed for a quick and simple set-up; the plastic blocks protect the waterproofness of the roof. This anchor is perfect on flat surfaces which the slope is lower or equal to 5°. It must be installed at 2500mm from the edge of the roof. Usable on asphalt, concrete, crushed stone and vegetated roofs.
Technical features:
• 300 kg ballasting.
• Ø 2500 mm bulk.
VECTASAFE® anchor point (x 1) :
• Coating: powder coated
• Resistance: 1200 daN.
• Not deformable
• Domain of use: inside or outside.
• Complies with standards EN 795 Class A1 (Attestation of compliance Apave N° AT5773804-1).
• Fixing on central piece by 2 screws H m12 x 35 + 4 washers M12 + 2 Nylstop nuts M12.
Plastic pads (x 24) :
• Weight: 12.5kg
• Integrated handles that facilitate transport and installation.
• Fixation on strut by M5 x 40 screw + M5 washers.
Central piece anchor support:
• Material: painted stainless steel.
Strut (x 8) :
• Material: raw aluminium.
• Bolt on a central piece by M10x50 screw + M10 washer + M10 nut.