Gas boiler HEATMASTER® 30 N

combicommercialindustrial

High performance, combined direct fired boiler and water heater Stainless steel tank in tank design Can also be used as a stand alone water heater Choice of Burner: - Low NOx premix gas or LPG - Forced draught natural gas or LPG - Pressure jet 28 sec or 35 sec oil Anti-Legionellae: Hot water stored at a consistently high temperature Built in Primary circuit shunt pump (HEP) Body completely insulated in rigid polyurethane foam Stove enameled casing No need for sacrificial anodes Control panel with Control Thermostat, T+P Gauge, Time Clock, Manual reset high limit thermostat, On/Off Switch, Summer/Winter Switch Most heating demands can be met by connecting two or more HeatMasters together Can be used in conjunction with Smart and Jumbo hot water storage tanks, supplying even the largest hot water requirement Vented or unvented use, mains pressure Systempak available Constructive characteristics Capacity (total) - 151 - L Capacity (primary) - 68 - L Capacity (domestic hot water) - 83 - L Capacity expansion tank(s) - 1 x 8 - L Chimney connection - 150 - Ømm Connection - heating - 1 ½ F - Ø" Connection - DHW - 3/4 M - Ø" Connection - safety valve - 1/2 M - Ø" Max operating temperature - 90 - °C Water pressure drop boiler at Δt = 20°C - 27 - mbar Max service pressure heating (primary) - 3 - bar Max service pressure (DHW) - 8,6 - bar Weight (empty) - 220 - kg Heating characteristics Heating time from 10 to 90°C - 34 - min Combustion Input max (heating) HCV - 38,8 - kW Input max (heating) LCV - 34,9 - kW Efficiency at 30% load (EN677) - 95,0 - % Efficiency (max output) 80/60°C - 90 - % NOx class (EN15502) - 5 - Output power max (80/60°C) - 31,4 - kW Domestic hot water performance Peak flow at 40°C - 380 - L/10’ Peak flow 1st hour at 40°C - 1130 - L/60’