Application
Acudor Electric Actuation Roof Hatches are designed to provide convenient, economical access to the roof of a building with the ease of automation. By adding an electric actuator, our hatch can be opened and closed remotely. This feature is available on small ladder access hatches, and more importantly on larger equipment hatches, which are typically heavy and difficult to operate.
Features RHA
Choice of operating switch and/or remote control
12V/24V DC Electrical Actuator. Suitable for mains supply AC 120V/60Hz or 230V/50Hz
Can open to any angle up to 80 degrees max
Battery back-up
Synchronized operation for large sizes
Optional Features RHA
Stainless Steel Hardware
Louvered Curbs
Curb Mounted Units
Curb pitch corrected for sloped roof
RHA Specifications:
Cover: Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft.
Curb: 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes
Door Latch: Self Locking feature of Electric Actuator replaces need for conventional locks in standard designs
Additional locking arrangements available upon request.