Galvanised steel bike racks

The bike rack SIDE is made in steel 50/10 thickness. It is the result of the continuous welding of 2 elements and on the base there are 2 holes 14 mm diam. for the fixing to the ground ...

The bike rack is made in steel sheet 60/10 thickness. The loop-shaped elements of the bike rack are welded to the plate with an interaxis of 65,2 cm. ...

The bike rack FILM (4 bike version) is made in steel of 100/10 thickness. The spacers, where the wheels of the bikes are placed, are laser-cut and square-shaped ...

Bicycle rack and / or pedestrian bollard, composed of a support with a base plate for fixing with bolts and of an oval central element, all in the steel tube. POWDER COATED STEEL FIXINGS: ...

The Goggle bike stand is an efficient combination of metal rings and freestanding poles. Sleek metal rings at the top provide fixtures where bicycles can be securely locked. The bicycle ...

MATERIAL: METAL, HOT DIP GALVANIZED FRAME: TUBULAR STEEL Ø30MM AND Ø25MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING, FREE STANDING

FRAME: TUBULAR STEEL Ø30MM AND Ø25MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING, FREE STANDING

FRAME: TUBULAR STEEL Ø30MM AND Ø25MM POWDER COATING: RAL COLOR TO CHOOSE FIXATION: FIXED IN THE GROUND, SURFACE MOUNTING, FREE STANDING ADFC proved!

The AGO bike rack is made of cold galvanized and polyester powder coated 8-mm thick steel. On the folded part there is a hole to lock the anti-theft chain. Ground fixing is by cementing ...

he RIO TOTEM bike rack is made of a square tube steel bar, 100×100 mm, thickness 20 mm, cold galvanized and polyester powder coated. Five steel plates, thickness 60/10 ...

The RIO bike rack is made of a square tube steel bar, 100×100 mm, thickness 20 mm, cold galvanized and polyester powder coated. Five steel plates, thickness 60/10 mm, ...

... structure composed of 40 mm calendered steel tube, fitted with floor fixing plate with 2 holes of 16 mm diameter for fixing to the ground an upper plate for holding the tubulars and with a hole for fixing the bike ...

... structure composed of 40 mm calendered steel tube, fitted with floor fixing plate with 2 holes of 16 mm diameter for fixing to the ground an upper plate for holding the tubulars and with a hole for fixing the bike ...

COMPOSED OF: Bicycle rack for 16 double-sided or single-sided stalls depending on the needs. COMPOSED OF: - Tubular as a base for anchoring to the floor and supporting structure - laser cut racks ...

... Gomez. A stand with a minimalist circular form for a unique side profile. It is composed of a pair of materials: a galvanised steel frame on the inside, with an external coating of durable rubber. ...

... as a standalone installation as it does next to other pieces of street furniture, always looking and working great. Galvanised steel structure treated with powder coating. The horizontal beam is made ...

... in car parking spaces on the streets. It looks great as a stand-alone piece as well as installed in groups. Galvanized steel tube treated with powder coating. Anchored below the ground. DESIGN: BALÁSZ ORLAI, PÉTER KUKORELLI

Bicycle rack in galvanized and powder coated square steel tube and stainless steel or galvanized and powder coated steel plate with base plate and rubber strip that protects ...

Cycle rack in galvanized and powder coated steel tube with extruded powder coated aluminum that encloses the side rubber strip to protect the bicycle. LED strip lighting on request.

... They can be combined in different colors and are of a specific size. Metal components are electrogalvanized and powder coated. All other connecting elements are made out of stainless steel. ...

Single bicycle stand made out of metal. The metal structure is electro-galvanized and powder coated. These technological treatments protect the metal from corrosion and prolong its operational characteristics. ...

Bike rack made out in combination of high-performance concrete and metal. Two materials that combine strength and stability. The concrete is reinforced and fiber strengthened. The aggregate structure ...

... the Arches Bike Rack–Single together with the Arches Bench, Arches Recycling Receptacle and Arches Litter Receptacle are the ideal complements to our Evos® and Weevos® playsystems and other playgrounds ...

It reuses the shape of the simple hoop to which has been added a laser cut steel sign that provides user information. Installed at the head of the array, the Univers Signage hoop allows users to instantly identify bicycle ...

Simple and economical, the Univers bike stand has a galvanized steel structure, for robustness, and a functional siding made of pressure treated pine wood, positioned to protect the frame. Its half-wheel ...

Description Structure : Galvanized steel sheet, thickness 4 mm. A laser-cut slot to lock the bike. Compatible to every lock.

... untreated weathering steel (-CT), optionally finished in galvanised steel (-TH) or steel finished in a double layer powder coating (-PC)

Ground mounted bicycle rack GM07-03 with special design. 3 racks on plate These kind of racks are used near commercial centers, shops, on parking, in parks and so on. Pipe diameter ...

... outdoor equipment Sizes: GM16-01 (1 racks): 800x800 mm GM16-02 (2 racks): 1000x880x800 mm GM16-03 (3 racks): 1700x880x800 mm GM16-04 (4 racks): 2500x880x800 mm

... shaped ground mounted bicycle rack GM06 with design specially for parking. Pipe diameter Ø42 mm 1 racks size 700x900 mm Any RAL color. Powder or thermoplastic coating Manufacture of coated, galvanized ...

... The “UX” Rack allows the use of “U”-type locks and provides two-point contact when the bike is resting against it. Finishes Available finish on the UX Bike Racks ...

... two-point contact when the bike is resting against it. This staple rack bike rack is a classic and simple, yet effective, way to promote alternative transportation and ...

... basic bike rack is a simple, yet effective way to promote alternative transportation and provide adequate short-term parking. Finishes The U24 bicycle rack is available in Galvanized, ...

Snake bicycle parking set with multiple configurations for 5, 7, 9 or 11 bikes depending on the model, built in galvanized iron or stainless steel.

Galvanized steel bicycle rack Rack model, ideal for storing up to two bikes at home, in the storage room, in the garage, in a store, etc... Very easy to asseble thanks ...

Scooter / E-Scooter racks in galvanized steel or AISI 304 stainless steel with rounded shapes that allow manual and electric scooters or scooters to be parked (more space for scooters). Modular ...

Single bike rack. Can be accessed on both sides of the rack. The stability of the bike is guaranteed. Made of steel with zinc rich primer.

Bike rack of 5 bike capacity. As many bike racks as desired can be added side by side. The wheel can be chained under the base of the bike ...

Robust 50 mm tubular bike rack. Suitable for attachment with the bicycle frame and wheel. Two available ground fixing versions: anchored and built-in. Made of cold rolled steel pipe. Have ...

It’s a 5 spaces structure made of a tubular steel bar Ø 40 mm and a tubular steel bar Ø 25 mm. Anchorage system: to be fixed on the ground. Entirely hot dip galvanized.

It consists of two supports with an anatomical shape in steel sheet 8 mm thick. It’s a 5 spaces structure made of a tubular steel bar Ø 40 mm and a tubular steel bar Ø 25 mm. Anchorage ...

It’s a 5 spaces structure made of a tubular steel bar Ø 80 mm and horizontal tubular steel bars with a square section 40 x 40 mm. Each bicycle space consists of tubular steel bar Ø 25 ...

Helios G is a parking and charging solution for light electric vehicles such as e-scooters and e-bikes. Helios-G is a smart solution thanks to its IoT technology that allows the control of the locks and the monitoring ...

... QUAY Cycle Stand B is one of a set of new products to compliment the QUAY range of street furniture. It provides somewhere to securely lock a bicycle whilst enhancing the surrounding street scene. ...

... other aspects of the MURTON cycle stand design, can be adjusted by our in-house bespoke design service – get in touch if you require more details. SPECIFICATIONS Composition Frame - Mild steel ...

Bike rack 1-2 places made of hot-galvanized steel. Cylindrical pole Ø60 mm with two rings Ø30mm for bike positioning Fastening : Fixing to floor "0" through extension ...

5-seater bike rack made of hot-galvanized steel. The bike rack allows you to create rest areas for Bikes. In particular this product ...

5-seater bike rack made of hot-dip galvanized steel. Cylindrical bended poles Ø60 mm thickness 3 mm fixed on two profiles 80x30 mm with holes prepared for ground fixing by expansion ...

A bike rack that holds wheels perfectly in place for total stability. The extra hoops allow users to easily lock wheels and frames together for maximum security. Model: 6 spaces. Structure: steel ...

The ultimate bike rack: Decorative, modular and functional. Models: 3 or 6 spaces, single or double sided. Structure: steel posts ø 76 mm, hoops ø 22 mm. Finish: galvanised ...

The ultimate bike rack: Decorative, modular and functional. Models: 3 or 6 spaces, single or double sided. Structure: steel posts ø 76 mm, hoops ø 22 mm. Finish: galvanised ...

HIC: - Dimensions: 2,00 x 0,50 x 0,30 m Zone dimensions: - Zone area: -